SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070
Selection Guide
Absolute Maximum Ratings at TA=25癈
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No.
Dice
Lens Type
Iv (mcd) [2]
@ 10mA
iewing
Angle [1]
Min.
Typ.
2?/2
Pure Orange (GaAsP/GaP)
Orange Transparent
15
40
34?/SPAN>
*12
*30
WP710A10NT
Parameter
Pure Orange
Units
Power dissipation
62.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
145
mA
Reverse Voltage
5
V
Operating/Storage Temperature
-40癈 To +85癈
Lead Solder Temperature [2]
260癈 For 3 Seconds
Lead Solder Temperature [3]
260癈 For 5 Seconds
Electrical / Optical Characteristics at TA=25癈
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
籶eak
Peak Wavelength
Pure Orange
607
nm
IF=20mA
籇 [1]
Dominant Wavelength
Pure Orange
602
nm
IF=20mA
敾1/2
Spectral Line Half-width
Pure Orange
35
nm
IF=20mA
C
Capacitance
Pure Orange
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Pure Orange
2.05
2.5
V
IF=20mA
IR
Reverse Current
Pure Orange
10
uA
VR = 5V
Notes:
1. ?/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.